Package: 3dm2 Architecture: amd64 Version: 2.11.00.019+10.2.1+KB16625-2+Debian.buster.10 Priority: optional Section: admin Source: 3dm2 (2.11.00.019+10.2.1+KB16625-2) Maintainer: Adam Cécile (Le_Vert) Installed-Size: 11912 Depends: lsb-base, default-mta | exim4 | postfix | sendmail | mail-transport-agent Filename: pool-buster/3dm2/3dm2_2.11.00.019+10.2.1+KB16625-2+Debian.buster.10_amd64.deb Size: 4962768 MD5sum: e315ed32671f6c9a6d285e68bbe42c97 SHA1: 93c7abafa319ebfba79dac13ded3436dc0f48487 SHA256: a4070b9d151e9dc68e0f43ea7cdf650b4cef9b30b8581c86eb254d5d1e85f65e SHA512: 024d62c0f73f6c4ed46d13d497a4b8645a3a0e1015aa2dd3de24e83af808fad91a15ad5c9dfa6d73f956da2013ba735d2015b5dced4fb4e9eb7bc38112e7d6b3 Homepage: http://www.3ware.com Description: 3ware 3DM2 RAID HBAs Management Utility 3ware Disk Manager 2 (3DM2), allows you to view the status of and manage 3ware RAID controllers and associated drives. . 3DM2 runs as a daemon. When it is running, you can use your browser to view status and perform administrative tasks locally or remotely. . It can also be used to report RAID failures by mail. . This package supports all known 3Ware controller. Package: 3ware-status Architecture: all Version: 0.6+Debian.buster.10 Priority: optional Section: admin Source: 3ware-status (0.6) Maintainer: Adam Cécile (Le_Vert) Installed-Size: 27 Depends: python, lsb-base, daemon, bsd-mailx | mailx, tw-cli (>= 9.5.0) Filename: pool-buster/3ware-status/3ware-status_0.6+Debian.buster.10_all.deb Size: 6984 MD5sum: 8fbb06620009096875c92492a440d205 SHA1: 0a1cae6d03c39e331889355e6b438c4a571e8a2b SHA256: 7e096088b6f671471b505e20612b08b75bb51cbf2c61f419c030df80b44d22b3 SHA512: caf0ac45be6e1c48ee7ee5844840e1ff1de6e993dbabf90cc10b95587bf7868497365ad63ba2e3a580cf6aca453404407aeb6677f74edd6099a387d89a6378f7 Description: get RAID status out of 3ware Eskalad HW RAID controllers The 3ware-status software is a query tool to access the running configuration and status of 3Ware HBAs. 3ware-status allows you to monitor the health and status of your RAID setup. Package: aacraid-status Architecture: all Version: 0.23+Debian.buster.10 Priority: optional Section: admin Source: aacraid-status (0.23) Maintainer: Adam Cécile (Le_Vert) Installed-Size: 38 Depends: python, lsb-base, daemon, bsd-mailx | mailx, arcconf (>= 7.30.18837) Filename: pool-buster/aacraid-status/aacraid-status_0.23+Debian.buster.10_all.deb Size: 10408 MD5sum: fa2a80cb2970067150d10b1adecb5f57 SHA1: 6cd7a77a9d3a3d81a9dfa70081c8ec1215413e39 SHA256: 1b80ca199e4a0ef549b32c649906c02c726fac46b3836d6c2833e151a78a8c94 SHA512: b7c4e1f010888567cb8ded399a43be110b9c4d04ef9471059c9ae4dc6d77690c232824d4c799d34dec974c3801f11bac8af49231d08b48b2269d64646f835833 Description: get RAID status out of Adaptec AACRaid HW RAID controllers The aacraid-status software is a query tool to access the running configuration and status of Adaptec SCSI HBAs. aacraid-status allows you to monitor the health and status of your RAID setup. Package: aacraid-status Architecture: all Version: 0.24+Debian.buster.10 Priority: optional Section: admin Source: aacraid-status (0.24) Maintainer: Adam Cécile (Le_Vert) Installed-Size: 38 Depends: python, lsb-base, daemon, bsd-mailx | mailx, arcconf (>= 7.30.18837) Filename: pool-buster/aacraid-status/aacraid-status_0.24+Debian.buster.10_all.deb Size: 10448 MD5sum: 5ac38d143d1b78f18e0b6a0b5a553371 SHA1: b0d1bb57277f7316d1acc017b20c5498f946bfce SHA256: e200b03a6efe3e79eaf541adc0f3b77252c030819a7a04b7b813f66fe9c40326 SHA512: b75a68a3dc6a07b9e79b56d2092204a60189c74d54b8c9247ee4e6b6ecc20e94876cd95aff65c9caccdaf99ffc620b8f352d58a469c8e64aeef19377b8191d15 Description: get RAID status out of Adaptec AACRaid HW RAID controllers The aacraid-status software is a query tool to access the running configuration and status of Adaptec SCSI HBAs. aacraid-status allows you to monitor the health and status of your RAID setup. Package: adaptec-universal-storage-mib Architecture: all Version: 7.31.18856-2+Debian.buster.10 Priority: optional Section: admin Source: adaptec-storage-manager-linux-32bit (7.31.18856-2) Maintainer: Adam Cécile (Le_Vert) Installed-Size: 138 Suggests: adaptec-storage-manager-snmpd Filename: pool-buster/adaptec-storage-manager-linux-32bit/adaptec-universal-storage-mib_7.31.18856-2+Debian.buster.10_all.deb Size: 30800 MD5sum: 973533450086b68ae47d8781ac0fa36f SHA1: 4b0ffeb3da566709d56b0f3c4e5b49ed2db952b6 SHA256: 249927bc42a2f42dc2dc852f36936d7376618d383f1e92929aa5d23af4bf37a0 SHA512: d1e4266c34886b9bad348e8251f3ec6569fdd8caa23714ad5a55022ed2dea9173a3446114bb7db6d5655db84efee97eb213e5a68077d28ab31f618eef0aea697 Homepage: http://www.adaptec.com/en-US/support/raid/sas_raid/SAS-5805Z/ Description: Adaptec Universal SNMP mib This package contains the SNMP mib that describes Adaptec Storage Manager's OIDs. Package: adaptec-storage-manager-agent Architecture: amd64 Version: 7.31.18856-2+Debian.buster.10 Priority: optional Section: admin Source: adaptec-storage-manager-linux-64bit (7.31.18856-2) Maintainer: Adam Cécile (Le_Vert) Installed-Size: 52 Depends: adaptec-storage-manager-common (= 7.31.18856-2+Debian.buster.10), lsb-base Suggests: arcconf | hrconf, adaptec-storage-manager-gui Filename: pool-buster/adaptec-storage-manager-linux-64bit/adaptec-storage-manager-agent_7.31.18856-2+Debian.buster.10_amd64.deb Size: 19154 MD5sum: df07eebbd0658b5e11084e6ca8b4f976 SHA1: c06dc0d5e18ae850a220a0f7ea0e08707600c64a SHA256: 815f00d70270ef67596e289bf3654ec2c508afb32605d7f9aa2cc28e5624b0ee SHA512: 208c041d0e6a7f4227581ed6b0fde90fda5971b1d6c597491b65bfcee58888c1aa90f5f1e2b0aabd6c3b28b217f894854980ae84ee1efedee68e04872d5ce45a Homepage: http://www.adaptec.com/en-US/support/raid/sas_raid/SAS-5805Z/ Description: Adaptec Storage Manager Agent Installing this agent on all your servers with Adaptec RAID HBAs will allow you to monitor and manage them with one main storage-manager-gui. . In exemple, install this agent on your server and then install storage-manager-gui on you primary workstation. Package: adaptec-storage-manager-common Architecture: amd64 Version: 7.31.18856-2+Debian.buster.10 Priority: optional Section: admin Source: adaptec-storage-manager-linux-64bit (7.31.18856-2) Maintainer: Adam Cécile (Le_Vert) Installed-Size: 14608 Depends: libc6 (>= 2.2.5), libgcc1 (>= 1:3.0), libstdc++5 (>= 1:3.3.6-15), default-jre-headless | java8-runtime-headless | java8-runtime | sun-java6-jre | sun-java5-jre Filename: pool-buster/adaptec-storage-manager-linux-64bit/adaptec-storage-manager-common_7.31.18856-2+Debian.buster.10_amd64.deb Size: 10322688 MD5sum: da3a0309a7ac5fb0cfb0afdd461e118c SHA1: 45261c5d33a465cdb2426e166dd5c7a096299387 SHA256: 7320bd1c3e0d7582bd6c6bd443db5c60c04ec2239d4f6bd299f3e0407705bf45 SHA512: 3cf65fbeac6e8ccf1e8d57c2c65192f7b1ae59487c59f5e1e1d2e8c09a986af7f959267032b9de8558091ea7794761c7a7bd178bfa035a74b843d77e2790e342 Homepage: http://www.adaptec.com/en-US/support/raid/sas_raid/SAS-5805Z/ Description: Common files for storage-manager-gui and storage-manager-agent This package contains shared files between storage-manager-gui and storage-manager-agent. . You should not install this package directly. Package: adaptec-storage-manager-gui Architecture: amd64 Version: 7.31.18856-2+Debian.buster.10 Priority: optional Section: admin Source: adaptec-storage-manager-linux-64bit (7.31.18856-2) Maintainer: Adam Cécile (Le_Vert) Installed-Size: 3934 Depends: adaptec-storage-manager-common (= 7.31.18856-2+Debian.buster.10) Suggests: arcconf | hrconf, storage-manager-agent Filename: pool-buster/adaptec-storage-manager-linux-64bit/adaptec-storage-manager-gui_7.31.18856-2+Debian.buster.10_amd64.deb Size: 1268352 MD5sum: f09c4ab6d2f8745420cc6d380160c471 SHA1: 7e7cbea6fd833115160090f2edaccfc48191d3c0 SHA256: 303c09a3b9879bf08b6dd0323b555e5c2eb4110babeaebd7cd34fc6c5b3e8b80 SHA512: 4a1fe5be4af07ab8dc03a3cfa60b02ae0857f17085c14d835c74bb127cde70c98a19705d99d250b12e9e79d5d46b9ed404af96106ef4268dcc63ba39d622d7b6 Homepage: http://www.adaptec.com/en-US/support/raid/sas_raid/SAS-5805Z/ Description: Adaptec Storage Manager Java UI Graphical interface to monitor and manage RAID arrays on Adaptec HBAs. . This utility can be used to aggregate several servers with RAID HBAs if they run storage-manager-agent or standalone. Package: adaptec-universal-storage-mib Architecture: all Version: 7.31.18856-2+Debian.buster.10 Priority: optional Section: admin Source: adaptec-storage-manager-linux-64bit (7.31.18856-2) Maintainer: Adam Cécile (Le_Vert) Installed-Size: 138 Suggests: adaptec-storage-manager-snmpd Filename: pool-buster/adaptec-storage-manager-linux-64bit/adaptec-universal-storage-mib_7.31.18856-2+Debian.buster.10_all.deb Size: 30836 MD5sum: 788e095f81fa773206f9562048b57613 SHA1: e54140936cfeb441a4ea38dfca70081acac354d2 SHA256: 5b299a4d6c0adc5e96ce24739f3ff883cd0669f51ebc74fe26da47d13b78db69 SHA512: 8f250d91fe8c08d32259e594563fe294ab871292a5ec4de7e0fe63a4584094fbc6528be6e6f43b9d62e5c26d8f803d378c06e61fc93611f20eb35191ee71dc58 Homepage: http://www.adaptec.com/en-US/support/raid/sas_raid/SAS-5805Z/ Description: Adaptec Universal SNMP mib This package contains the SNMP mib that describes Adaptec Storage Manager's OIDs. Package: adaptec-universal-storage-snmpd Architecture: amd64 Version: 7.31.18856-2+Debian.buster.10 Priority: optional Section: admin Source: adaptec-storage-manager-linux-64bit (7.31.18856-2) Maintainer: Adam Cécile (Le_Vert) Installed-Size: 1109 Depends: libc6 (>= 2.3), libgcc1 (>= 1:3.0), libstdc++5 (>= 1:3.3.6-15), libwrap0 (>= 7.6-4~), adaptec-storage-manager-agent (= 7.31.18856-2+Debian.buster.10), lsb-base, snmpd Recommends: adaptec-universal-storage-mib Suggests: arcconf | hrconf, adaptec-storage-manager-gui Filename: pool-buster/adaptec-storage-manager-linux-64bit/adaptec-universal-storage-snmpd_7.31.18856-2+Debian.buster.10_amd64.deb Size: 372254 MD5sum: 396529d7ea5b1b4d3b03a96091794658 SHA1: da1cd42d882b83bb0a003e098c45be85011d9500 SHA256: f32bc1592e5edf9908cbd0e00a23f6d5e297470dd7be14f2733daee5183dde83 SHA512: 8cd9e7ad620e2d165480d541771a4d7b4d1d4812e2ad6434051607bdc2f4da1e07d66eb51c652d133992ecbb39c352d6ab3a88dbd1a324105b3046c63f5ce6d3 Homepage: http://www.adaptec.com/en-US/support/raid/sas_raid/SAS-5805Z/ Description: Adaptec Storage Manager SNMP daemon This agent connects Adaptec Storage Manager to your SNMP daemon, so you can monitor your RAID system through SNMP. . This package contains aus-snmpd tool. Package: arcconf Architecture: amd64 Version: 7.31.18856-2+Debian.buster.10 Priority: optional Section: admin Source: adaptec-storage-manager-linux-64bit (7.31.18856-2) Maintainer: Adam Cécile (Le_Vert) Installed-Size: 1876 Depends: libc6 (>= 2.2.5), libgcc1 (>= 1:3.0), libstdc++5 (>= 1:3.3.6-15) Suggests: adaptec-storage-manager-gui | adaptec-storage-manager-agent Filename: pool-buster/adaptec-storage-manager-linux-64bit/arcconf_7.31.18856-2+Debian.buster.10_amd64.deb Size: 575350 MD5sum: 833171f9f95df36c6cb46f28876117c1 SHA1: 3cff80ce8862aa5acd0b34b86232d0b0a4d522a0 SHA256: 8b35e14523c6fcad9dc3115d0c0f7dbc47fcc717f9ccf62fe32921614da3c98e SHA512: 4cc517c19d80b148f277d31d2bed472f03316841b75027ed6d33f174726df22d8afa4a47d1b93fcc4f3d67c385ef9d0ae3b29c5bedc49efde9c226023fd710d5 Homepage: http://www.adaptec.com/en-US/support/raid/sas_raid/SAS-5805Z/ Description: Adaptec AACRaid HBAs command line tool Management and monitoring command line tool by Adaptec for the Adaptec Advanced Raid HBAs (aacraid). . It replace the old afacli command line utility. . Adaptec AACRaid controllers are also used under theses names: Dell PERC2, 2/Si, 3/Si, 3/Di, HP NetRAID-4M, IBM ServeRAID & ICP SCSI driver Package: hrconf Architecture: amd64 Version: 7.31.18856-2+Debian.buster.10 Priority: optional Section: admin Source: adaptec-storage-manager-linux-64bit (7.31.18856-2) Maintainer: Adam Cécile (Le_Vert) Installed-Size: 1674 Depends: libc6 (>= 2.2.5), libgcc1 (>= 1:3.0), libstdc++5 (>= 1:3.3.6-15) Suggests: adaptec-storage-manager-gui | adaptec-storage-manager-agent Filename: pool-buster/adaptec-storage-manager-linux-64bit/hrconf_7.31.18856-2+Debian.buster.10_amd64.deb Size: 359218 MD5sum: 8e5a36f3aa43f91c549ad9c173c0a0ce SHA1: 6e72a95716f9aa40283529dfc2cfcdd78146999a SHA256: 41933d162d7eccf24060035f9ff93644926cdb8f26526c8e676a9956212fd04c SHA512: 3297f0e959c26c875dafade752b043e6c6aac940bc0a39fb24ba830f26e9114ce676592c4d1d9449b789fb5a12df77da0b62fa1cb349be0fdbdc5b12208c9575 Homepage: http://www.adaptec.com/en-US/support/raid/sas_raid/SAS-5805Z/ Description: Adaptec HostRaid HBAs command line tool Management and monitoring command line tool by Adaptec for the Adaptec HostRaid HBAs. Package: arcconf Architecture: amd64 Version: 1:1.05.20942-1+Debian.buster.10 Priority: optional Section: admin Source: arcconf-1.05 (1:1.05.20942-1) Maintainer: Adam Cécile (Le_Vert) Installed-Size: 2110 Depends: libc6 (>= 2.3.4), libgcc1 (>= 1:3.0), libstdc++6 (>= 4.1.1) Filename: pool-buster/arcconf-1.05/arcconf_1.05.20942-1+Debian.buster.10_amd64.deb Size: 665418 MD5sum: 4774504c32d8bb460fde2359585e38ad SHA1: bfbeb7c654b5512e8f6a6f1c63a097419c2efd1d SHA256: a620786e2874a13ff9ebf8567f32609089dd095eb34f86402ea0ec4162c6337b SHA512: 5865b7e21ff4ce71a38456f45e7c621f8368856fe7d5f31ff0c777ea24fb45b9db6c1c177d4a9b58918e24e488322ac97ca9d9185d5ad296c935b93ef0e8435c Description: Adaptec ARCCONF command line tool Compatible Products: . Adaptec RAID 6405 Adaptec RAID 6405E Adaptec RAID 6405T Adaptec RAID 6445 Adaptec RAID 6805 Adaptec RAID 6805E Adaptec RAID 6805Q Adaptec RAID 6805T Adaptec RAID 6805TQ Adaptec RAID 7805 Adaptec RAID 7805Q Adaptec RAID 78165 Adaptec RAID 71605E Adaptec RAID 71605 Adaptec RAID 71605Q Adaptec RAID 71685 Adaptec RAID 72405 Adaptec RAID 8805 Adaptec RAID 8885 Adaptec RAID 8885Q Adaptec RAID 81605ZQ Package: arcconf Architecture: amd64 Version: 1:1.07.21229-1+Debian.buster.10 Priority: optional Section: admin Source: arcconf-1.07 (1:1.07.21229-1) Maintainer: Adam Cécile (Le_Vert) Installed-Size: 2358 Depends: libc6 (>= 2.3.4), libgcc1 (>= 1:3.0), libstdc++6 (>= 4.1.1) Filename: pool-buster/arcconf-1.07/arcconf_1.07.21229-1+Debian.buster.10_amd64.deb Size: 739010 MD5sum: 337dba7fe99ee5fffb4ffb474b5d08eb SHA1: 4cb65e317242a81db5e135d9d7859e152105837c SHA256: 9092974622c43798044e7c3b4cc82d6ecb72db977fe17dfdaa296efdadce0bdb SHA512: f48cdef3a2dc3245e0179b9643777e3e8fd8e375cda03a4484a363734ad6f1713f780f03725e73fc914b9913499128b9e897c78261e4b97d57db8b96f2243deb Description: Adaptec ARCCONF command line tool Compatible Products: . Adaptec RAID 6405 Adaptec RAID 6405E Adaptec RAID 6405T Adaptec RAID 6445 Adaptec RAID 6805 Adaptec RAID 6805E Adaptec RAID 6805Q Adaptec RAID 6805T Adaptec RAID 6805TQ Adaptec RAID 7805 Adaptec RAID 7805Q Adaptec RAID 71605 Adaptec RAID 71605E Adaptec RAID 71605Q Adaptec RAID 71685 Adaptec RAID 72405 Adaptec RAID 78165 Adaptec RAID 8405 Adaptec RAID 8805 Adaptec RAID 8885 Adaptec RAID 8885Q Adaptec RAID 81605ZQ Package: arcconf Architecture: amd64 Version: 1:1.08.21375-1+Debian.buster.10 Priority: optional Section: admin Source: arcconf-1.08 (1:1.08.21375-1) Maintainer: Adam Cécile (Le_Vert) Installed-Size: 2411 Depends: libc6 (>= 2.3.4), libgcc1 (>= 1:3.0), libstdc++6 (>= 4.1.1) Filename: pool-buster/arcconf-1.08/arcconf_1.08.21375-1+Debian.buster.10_amd64.deb Size: 761810 MD5sum: 1cbf009dadd8a6e5e8a590aa5aeac774 SHA1: 9121bee515014f48f3e7a0cb96398f293ddd8e17 SHA256: e3910bd1afed65110110ad09c97197875a8344e7b63094ee7321eee1c5f03a2c SHA512: 7837effd49bcb54b0aa19a47bf27784b580cd8993d58723a0c1bf2edfdc658405e46f6043b3f3e802d530112de96fd25dd89193c0d38de572c2ea18b190c9c7e Description: Adaptec ARCCONF command line tool Compatible Products: . Adaptec RAID 6405 Adaptec RAID 6405E Adaptec RAID 6405T Adaptec RAID 6445 Adaptec RAID 6805 Adaptec RAID 6805E Adaptec RAID 6805Q Adaptec RAID 6805T Adaptec RAID 6805TQ Adaptec RAID 7805 Adaptec RAID 7805Q Adaptec RAID 71605 Adaptec RAID 71605E Adaptec RAID 71605Q Adaptec RAID 71685 Adaptec RAID 72405 Adaptec RAID 78165 Adaptec RAID 8405 Adaptec RAID 8805 Adaptec RAID 8885 Adaptec RAID 8885Q Adaptec RAID 81605Z Adaptec RAID 81605ZQ Package: arcconf Architecture: amd64 Version: 1:2.02.22404-1+Debian.buster.10 Priority: optional Section: admin Source: arcconf-2.02 (1:2.02.22404-1) Maintainer: Adam Cécile (Le_Vert) Installed-Size: 15123 Depends: libc6 (>= 2.3.4), libgcc1 (>= 1:3.0), libstdc++6 (>= 4.1.1) Filename: pool-buster/arcconf-2.02/arcconf_2.02.22404-1+Debian.buster.10_amd64.deb Size: 4274190 MD5sum: 5f7d730417e8d1d96b92030a0d094d57 SHA1: 5a4c0224b64d5002543e92edb7735f6e77e29165 SHA256: f9c38ec5fc398e37c864188e4938a9017cd4cc814093df33a9f101a32fb7a6dc SHA512: df099c2b93f35b61b6ac33428d4e4475385b9583c7b4afdc80d1d593aa813a038ae90bde3527c957bdb533440ee1aa560da298c60b5b8f3ecee360cc74e545c7 Description: Adaptec ARCCONF command line tool Compatible Products: . Adaptec RAID 6405E Adaptec RAID 6405T Adaptec RAID 6445 Adaptec RAID 6805 Adaptec RAID 6805E Adaptec RAID 6805Q Adaptec RAID 6805T Adaptec RAID 6805TQ Adaptec RAID 7805 Adaptec RAID 7805Q Adaptec RAID 71605 Adaptec RAID 71605E Adaptec RAID 71605Q Adaptec RAID 71685 Adaptec RAID 72405 Adaptec RAID 78165 Adaptec RAID 8405 Adaptec RAID 8405E Adaptec RAID 8805 Adaptec RAID 8805E Adaptec RAID 8885 Adaptec RAID 8885Q Adaptec RAID 81605Z Adaptec RAID 81605ZQ PMC Adaptec HBA 1000-8e PMC Adaptec HBA 1000-8i PMC Adaptec HBA 1000-8i8e PMC Adaptec HBA 1000-16e PMC Adaptec HBA 1000-16i Adaptec SAS Expander 82885T Package: cciss-vol-status-dbgsym Architecture: amd64 Version: 1.12-1+hwraid1+Debian.buster.10 Auto-Built-Package: debug-symbols Priority: optional Section: debug Source: cciss-vol-status (1.12-1+hwraid1) Maintainer: Christian Hofstaedtler Installed-Size: 52 Depends: cciss-vol-status (= 1.12-1+hwraid1+Debian.buster.10) Filename: pool-buster/cciss-vol-status/cciss-vol-status-dbgsym_1.12-1+hwraid1+Debian.buster.10_amd64.deb Size: 37980 MD5sum: 8abd52654d264eb7edcd9ea5fd7789fb SHA1: e38d2810d92bc7a82cbb628fdf9271c925f7b99a SHA256: 791a73b3732e2855cf898b051efa2a5387a87dc4d43909282fca2dbb1eb3056d SHA512: 018223110cf56cfc3f936b264de9e8d46a7414cb5498d7f6ebe131b3ff1c86bc93b1d6f14fa3d866c130f91593f92fdfa70ba576f8454646082e8b1c629f1c4e Description: debug symbols for cciss-vol-status Build-Ids: 5b502032f6e02de33547bedd616eace1cef76747 Package: cciss-vol-status Architecture: amd64 Version: 1.12-1+hwraid1+Debian.buster.10 Priority: optional Section: admin Source: cciss-vol-status (1.12-1+hwraid1) Maintainer: Christian Hofstaedtler Installed-Size: 85 Depends: libc6 (>= 2.4), lsb-base, daemon, bsd-mailx | mailx Filename: pool-buster/cciss-vol-status/cciss-vol-status_1.12-1+hwraid1+Debian.buster.10_amd64.deb Size: 32570 MD5sum: efedfa8a08012183f25cd47e600b83de SHA1: 9d0ab7b98c6d1e53ff98361fe62c5f25a663eb48 SHA256: 8c872c56936d0c9cfe0e559a3929dad4355518118d58f8b9fc850da92140afd8 SHA512: e390072de9e546057d07fe087910abb1c062abdf678c89f610cee8466c759c800c7b0ca9f7304a090b8fa9dd9e2ac86faa00e76ddc024805f194e7f255f771c4 Homepage: http://cciss.sourceforge.net/ Description: HP SmartArray RAID Volume Status Checker A RAID monitor for HP SmartArray Controllers, as supported by the "cciss", "hpsa", "hpahcisr" kernel drivers. It will check for problems on your configured logical drives, without relying on the controller's event log. . It also supports MSA500 and MSA1000 controllers. Package: dellmgr Architecture: amd64 Version: 5.31-4+Debian.buster.10 Priority: optional Section: admin Source: dellmgr (5.31-4) Maintainer: Adam Cécile (Le_Vert) Installed-Size: 587 Filename: pool-buster/dellmgr/dellmgr_5.31-4+Debian.buster.10_amd64.deb Size: 230182 MD5sum: 045b98bb397800c6eb0884e6a92da7e9 SHA1: dc9b5eac12a5f6a922badd763160460663615ad7 SHA256: 4b6531e55f81171e9318260fb7b531ac9db90a59d3b8b6f14e1b7f0aeb17ec43 SHA512: 2eafda131e1e913e21211852e3fe8716be4423d3610301043963843402e0c129872764fb6423730f25e368c5016c77571f6e0aff316419a725666e786e44749f Homepage: http://linux.dell.com Description: Manage DELL PERC/CERC cards based on LSI MegaRAID chip This tool allow you to access the RAID card BIOS from Linux. . Useful to manage arrays or start maintenance operations. . If you have a MegaRAID card, which doesn't come from Dell, look at megamgr package instead. . This tool will not work on recent SAS cards. Package: hpacucli Architecture: amd64 Version: 9.20.9.0-2+Debian.buster.10 Priority: optional Section: non-free/admin Source: hpacucli (9.20.9.0-2) Maintainer: Adam Cécile (Le_Vert) Installed-Size: 17513 Depends: libc6 (>= 2.3.4), libgcc1 (>= 1:3.0), libstdc++6 (>= 4.1.1) Filename: pool-buster/hpacucli/hpacucli_9.20.9.0-2+Debian.buster.10_amd64.deb Size: 3671430 MD5sum: 6c6e8a7b9dd1b665d1aed8b850e2a3c8 SHA1: dc6802494d77bd47829ada1415f3421c5731f68d SHA256: 491a40497d7c5cb193059a84b68a388f2ee1cf44a51c16b1a3e23f646eba03dc SHA512: a20022b371511c39bf7ce48bce7b2aa965551cf54f8aa4b823e16629093e0badf38ccf6f91a447c553aa200b1450b147e21118cfc0995ff4c345c480729a3d2c Description: HP command line SmartArray configuration utility This is the proprietary command line utility from HP to manage HP/Compaq SmartArray hardware RAID HBAs mostly found in Proliant servers. Package: lsiutil-dbgsym Architecture: amd64 Version: 1.60-3+Debian.buster.10 Auto-Built-Package: debug-symbols Priority: optional Section: debug Source: lsiutil (1.60-3) Maintainer: Adam Cécile (Le_Vert) Installed-Size: 33 Depends: lsiutil (= 1.60-3+Debian.buster.10) Filename: pool-buster/lsiutil/lsiutil-dbgsym_1.60-3+Debian.buster.10_amd64.deb Size: 8724 MD5sum: b986279a2de631ea0a228a6d79a3e614 SHA1: a34e46eefe8875d5b48520efff19a57e001fed8e SHA256: bf2291e728fc35a98a6e5d0fb04bf7fd1fc95a46fe147a7d54a5b66457a0c632 SHA512: af9109ff66bc18fcdbc3f2d00d5b24ad151f5bad258f18a2815f793a22510682578fddee33b7910fae6bcef64ed883b79e45aeea4139e2b4f8c3b104947c7140 Description: debug symbols for lsiutil Build-Ids: c836ff5ed4a5a0c262be0078826c8b075353bd7e Package: lsiutil Architecture: amd64 Version: 1.60-3+Debian.buster.10 Priority: optional Section: admin Source: lsiutil (1.60-3) Maintainer: Adam Cécile (Le_Vert) Installed-Size: 873 Depends: libc6 (>= 2.14) Filename: pool-buster/lsiutil/lsiutil_1.60-3+Debian.buster.10_amd64.deb Size: 311838 MD5sum: 0406c24b154d6194ba3fd73b3ef8b9e0 SHA1: f64945b6477580ccdbf2bcc4dd38c68d8577ffac SHA256: 6504c14316644d09ab433e648909e39f22e74e4c8d689ad236c68b146518457c SHA512: daac1f0f33655ce16245c4161057bb397c90ec8aa3905f8f3f2bfc6cad1e513ddfec39cf52700c81aee5f49ba1869dfaf09526c2d200bd24348237c549d07e67 Homepage: http://www.lsi.com Description: LSI Logic Fusion MPT Command Line Interface management tool This package contains the "lsiutil" command line tool to manage LSI Fusion MPT RAID HBAs. Package: megacli Architecture: amd64 Version: 8.07.14-2+Debian.buster.10 Priority: optional Section: admin Source: megacli (8.07.14-2) Maintainer: Adam Cécile (Le_Vert) Installed-Size: 6695 Provides: megaclisas Depends: libc6 (>= 2.3), libgcc1 (>= 1:3.0), libncurses5 (>= 6), libstdc++6 (>= 4.1.1) Conflicts: megaclisas Replaces: megaclisas Filename: pool-buster/megacli/megacli_8.07.14-2+Debian.buster.10_amd64.deb Size: 4174354 MD5sum: f111f5bbd8f5f8dffab60bcd9e9215a9 SHA1: 192a2bc69e54fcc5838aa5dc2dba3b3317369583 SHA256: 52c8c8a793c384c6e48ef5a59ad2eff7caf1a38fe482de06405ffea963bac396 SHA512: 14adea5869dd8ba9fa250af18e7f2bd3e241a9f5a25603e31cdee9a9842abef6da16dc1fb363b25941c282273ccc7771e5fc323a5a4a71f4888fac393f013be8 Homepage: http://www.lsi.com/support/Pages/Download-Results.aspx?keyword=megacli Description: LSI Logic MegaRAID SAS MegaCLI Tool to read and setup LSI Logic MegaRAID SAS HW RAID HBAs. Package: megacli Architecture: amd64 Version: 8.07.14-3+Debian.10.buster Priority: optional Section: admin Source: megacli (8.07.14-3) Maintainer: Adam Cécile (Le_Vert) Installed-Size: 6695 Provides: megaclisas Depends: libc6 (>= 2.3), libgcc1 (>= 1:3.0), libncurses5 (>= 6), libstdc++6 (>= 4.1.1) Conflicts: megaclisas Replaces: megaclisas Filename: pool-buster/megacli/megacli_8.07.14-3+Debian.10.buster_amd64.deb Size: 4174162 MD5sum: f0359bcc29e3ca3438e380ee2f061237 SHA1: 3ec5fa87713debe3689cba11fc68eef8fcee2690 SHA256: 8eb4ea5c06b975742b69ba2f815306e968a8118cb71a69d7a1c3bbdb9d187df1 SHA512: 6b14d202ca23fb34b82a065756a4c7e2723948f50d6bbfb5053582467b1f17b80b008eae797b96774fc91066231454961bfb2df7bde30a2e96f19923260fa4d1 Homepage: http://www.lsi.com/support/Pages/Download-Results.aspx?keyword=megacli Description: LSI Logic MegaRAID SAS MegaCLI Tool to read and setup LSI Logic MegaRAID SAS HW RAID HBAs. Package: megaclisas-status Architecture: all Version: 0.16+Debian.buster.10 Priority: optional Section: admin Source: megaclisas-status (0.16) Maintainer: Adam Cécile (Le_Vert) Installed-Size: 56 Depends: python, lsb-base, daemon, bsd-mailx | mailx, megacli Filename: pool-buster/megaclisas-status/megaclisas-status_0.16+Debian.buster.10_all.deb Size: 13530 MD5sum: ab2280fbfdb139452209258458531e10 SHA1: ce13003dd785b7799c739596c71fbf3271ce1170 SHA256: 3d7538dea6a4458f946b6d5cfb43b2bedbf746d29d0ee8d27b8f6946358f89ee SHA512: 98aec001c47d16c667dc17e8b99d746c2f8e1790a29c0fce897d6133eef287294d401f8f377be9411eb66ae615756fd48fc00f66690c97d3f586fd9190fa99b9 Description: get RAID status out of LSI MegaRAID SAS HW RAID controllers The megacli-status software is a query tool to access the running configuration and status of LSI MegaRAID SAS HBAs. . It uses LSI MegaCli proprietary command line tool. Package: megaclisas-status Architecture: all Version: 0.17+Debian.buster.10 Priority: optional Section: admin Source: megaclisas-status (0.17) Maintainer: Adam Cécile (Le_Vert) Installed-Size: 55 Depends: python, lsb-base, daemon, bsd-mailx | mailx, megacli Filename: pool-buster/megaclisas-status/megaclisas-status_0.17+Debian.buster.10_all.deb Size: 13678 MD5sum: 0010d2a75cedbfc2777231e07cda2834 SHA1: 4011300c461362d395e05984d7051f446d72d0b1 SHA256: ddf271278b805e345ea43f402002135e205006ad8af6c4156a5dfcf9e23e4543 SHA512: 27838d3e2e1cfe3ebbb64ada7e05e0c6f8e72a2ba0296c7110dfb3ba026b02b3a73187c1e3647bf9fa11f3c872eba96a7ff87ff294e088fb6547d0cfe1c990ee Description: get RAID status out of LSI MegaRAID SAS HW RAID controllers The megacli-status software is a query tool to access the running configuration and status of LSI MegaRAID SAS HBAs. . It uses LSI MegaCli proprietary command line tool. Package: megaclisas-status Architecture: all Version: 0.18+Debian.10.buster Priority: optional Section: admin Source: megaclisas-status (0.18) Maintainer: Adam Cécile (Le_Vert) Installed-Size: 63 Depends: python3, lsb-base, daemon, bsd-mailx | mailx, megacli Filename: pool-buster/megaclisas-status/megaclisas-status_0.18+Debian.10.buster_all.deb Size: 14126 MD5sum: fd93358659aa87d99a96a9d3b538015e SHA1: 397bc6908db8fa74866e86e54f6bde363b8f9fc7 SHA256: ee0320e472ef31d49f3c574a01cfa79faed8187a426788a769f26814e0f91bc6 SHA512: ebfd8fb9a46c5baf0bc06fcb0228cd8d8e82532ecba8c14e605341845fe42369200b79bf42fb363f6db0bba3a68da70a5f61e76949258fdae3ed554df74041c8 Description: get RAID status out of LSI MegaRAID SAS HW RAID controllers The megacli-status software is a query tool to access the running configuration and status of LSI MegaRAID SAS HBAs. . It uses LSI MegaCli proprietary command line tool. Package: megactl-dbgsym Architecture: amd64 Version: 0.4.1+svn20090725.r6-7+Debian.buster.10 Auto-Built-Package: debug-symbols Priority: optional Section: debug Source: megactl (0.4.1+svn20090725.r6-7) Maintainer: Adam Cécile (Le_Vert) Installed-Size: 145 Depends: megactl (= 0.4.1+svn20090725.r6-7+Debian.buster.10) Filename: pool-buster/megactl/megactl-dbgsym_0.4.1+svn20090725.r6-7+Debian.buster.10_amd64.deb Size: 116382 MD5sum: 98c9ef6722e52d6e951061ac79b6611a SHA1: c6079bc1a981ee889ac63f791db8bba2b0e68b2b SHA256: 810861f28d22721e3afaadeb62540f326b3ddf08e3a1e91425fdd00eeb0e4ea1 SHA512: 87fd80c3d3d7d8bd5119d30df44aaf32c9f568526f127531a939e563ae8531dc53c600a5417648b21e4771b418672200079d9555ec4a0acdb43e2466848c8a13 Description: debug symbols for megactl Build-Ids: 15f8e283bdc5545d2d0311c7d5f38be800690ac7 dd43e7bb3ea16d13ebff4063c2678b410d32e099 fa4a0290720c7eb18828132e722cd9ac66292245 Package: megactl Architecture: amd64 Version: 0.4.1+svn20090725.r6-7+Debian.buster.10 Priority: optional Section: admin Source: megactl (0.4.1+svn20090725.r6-7) Maintainer: Adam Cécile (Le_Vert) Installed-Size: 159 Depends: libc6-i386 Filename: pool-buster/megactl/megactl_0.4.1+svn20090725.r6-7+Debian.buster.10_amd64.deb Size: 42258 MD5sum: 30ed193ac5df728549dab05d28b54e4e SHA1: 2798de429f2811c1ca81ccb20c40f93edced28f4 SHA256: 0736a3d26cd5ea2415b1946a7ad7d10d6b8226aa294b3b5a2c752348c0bc2045 SHA512: 3a92d38d6c87be2ff3e76aa3c1e3cdc040212f75d9361ae5b70cc9a12b620a2449bf1c46b01fbc011ea043005f6904645ee2be1b024af81ed6da0733672aa319 Homepage: http://sourceforge.net/projects/megactl Description: LSI MegaRAID SCSI/SAS reporting tool This package contains both megactl and megasasctl tools that can be used to query LSI's MegaRAID adapters status. . It reports status and informations about the adapter itself, it's logical disks and the physical disks attached. Package: megaide-status Architecture: all Version: 0.4+Debian.buster.10 Priority: optional Section: admin Source: megaide-status (0.4) Maintainer: Adam Cécile (Le_Vert) Installed-Size: 29 Depends: python, lsb-base, daemon, bsd-mailx | mailx Filename: pool-buster/megaide-status/megaide-status_0.4+Debian.buster.10_all.deb Size: 7176 MD5sum: 28896747768ff888fb3d6ae4e21a6b7d SHA1: 52b0157d7a1c8c791f65123062a2fafc31b976a6 SHA256: b607d545123aa37a0881153a492921dc4347ef15f592ca596d956c6740ba447b SHA512: a4fd7b9d3629aa604e901bcfabc489f376e34311e97aa0abb5eaddcfdaa2227cad1a084353a6cc161d14bad2da6d4d7fd7c81d64361f4c741a1c1b4bbb3675f9 Description: get RAID status out of LSI MegaIDE Software RAID controllers The megaide-status software is a query tool to access the running configuration and status of LSI MegaIDE HBAs. Package: megamgr Architecture: amd64 Version: 5.20-4+Debian.buster.10 Priority: optional Section: admin Source: megamgr (5.20-4) Maintainer: Adam Cécile (Le_Vert) Installed-Size: 580 Filename: pool-buster/megamgr/megamgr_5.20-4+Debian.buster.10_amd64.deb Size: 214554 MD5sum: 025a65db0e6142b1b291f82f0f92b9e0 SHA1: 4d76203f8f8a280b4c4b76918cec11662443e5a1 SHA256: 20b7ccce62dc2bc44811c5ca6e9ca62281e95c668e21b61dcf0736a21d672319 SHA512: 18d24c053e6710571481fda186de7ed8cb7e14550d37e71ffe4fde23e678a05e5977dd9a3915e67f4a214d956eaae3f0b0e6a30c0c9f5ee1c1e92dbf8cc3ef4e Homepage: http://www.lsi.com/files/support/rsa/utilities/megamgr Description: Manage LSI MegaRAID chip based cards This tool allow you to access the RAID card BIOS from Linux. . Useful to manage arrays or start maintenance operations. . If you have a MegaRAID card from DELL (PERC/CERC), look at dellmgr package instead. . This tool will not work on recent SAS cards. Package: megaraid-status Architecture: all Version: 0.13+Debian.buster.10 Priority: optional Section: admin Source: megaraid-status (0.13) Maintainer: Adam Cécile (Le_Vert) Installed-Size: 34 Depends: python, lsb-base, daemon, bsd-mailx | mailx, megactl Filename: pool-buster/megaraid-status/megaraid-status_0.13+Debian.buster.10_all.deb Size: 7556 MD5sum: 429ac26125569716759c541472fc618a SHA1: e1147f85ad241e07390c330547b4161fdae86ecf SHA256: 6cdc1e8846cc8440d2d6c7e38ffa79d853578038213d1da3cac9fc7b29382bfb SHA512: fb705d95810d5effa0eb8c96e40c6adbd9ca6a681ded11bbc795ed47bd376c57708d719f0bf9b4c9031b406cc286b64a2c77dddd273119f560b4d0400bc60876 Description: get RAID status out of LSI MegaRAID SCSI/SAS HW RAID controllers The megaraid-status software is a query tool to access the running configuration and status of LSI MegaRAID SCSI/SAS HBAs. aacraid-status allows you to monitor the health and status of your RAID setup. Package: mpt-status-dbgsym Architecture: amd64 Version: 1.2.0-8+hwraid1+Debian.buster.10 Auto-Built-Package: debug-symbols Priority: optional Section: debug Source: mpt-status (1.2.0-8+hwraid1) Maintainer: Debian QA Group Installed-Size: 36 Depends: mpt-status (= 1.2.0-8+hwraid1+Debian.buster.10) Filename: pool-buster/mpt-status/mpt-status-dbgsym_1.2.0-8+hwraid1+Debian.buster.10_amd64.deb Size: 21932 MD5sum: 291995b1ef709c0f747cca9769e9209a SHA1: 8454d39020a3ca81f872e1544c997e4467626ba6 SHA256: 41214f59582896e8743a7b5f3ff27a744200a8fa4310b19518ff6b1652686bfd SHA512: 56f47b140fc69da8542eae5c1c10259b151c1efbfa664cf27cf7cbb89bf6f7dd4f45fa8d810ad6265cd8efb30584442dee422cf7527796aa6beb5713bfe209ad Description: debug symbols for mpt-status Build-Ids: 1ae9ec29bf3d173e4e6e979d136c6ff4bc997d97 Package: mpt-status Architecture: amd64 Version: 1.2.0-8+hwraid1+Debian.buster.10 Priority: optional Section: admin Source: mpt-status (1.2.0-8+hwraid1) Maintainer: Debian QA Group Installed-Size: 62 Depends: libc6 (>= 2.4), lsb-base, daemon, bsd-mailx | mailx Filename: pool-buster/mpt-status/mpt-status_1.2.0-8+hwraid1+Debian.buster.10_amd64.deb Size: 26342 MD5sum: e8ad1a2d187a34562329aeee71bc6a45 SHA1: 6e279d0aa446006760742c014c3057daa919481c SHA256: fbeb1cf0a09d5abf8d0a05fcde95a98c898d05208ec92473fc4cbf94ee558b03 SHA512: e45d88921b83348fbe7dc8466de52ca41d559ed55f8331afe0aae7bca3ccf4cd22a254eec07f74525d6227607a5c1e7b924672133affd3aac1540896ddd34853 Description: get RAID status out of mpt (and other) HW RAID controllers The mpt-status software is a query tool to access the running configuration and status of LSI SCSI HBAs. mpt-status allows you to monitor the health and status of your RAID setup. Package: sas2ircu-status Architecture: all Version: 0.8+Debian.buster.10 Priority: optional Section: admin Source: sas2ircu-status (0.8) Maintainer: Adam Cécile (Le_Vert) Installed-Size: 32 Depends: python, lsb-base, daemon, bsd-mailx | mailx, sas2ircu Filename: pool-buster/sas2ircu-status/sas2ircu-status_0.8+Debian.buster.10_all.deb Size: 8724 MD5sum: e0d58c2606328eb5fced7f5d3093706c SHA1: 5cbef246b4b91422042467c20380ab9aafd6cde2 SHA256: b8e86eaec4a18e6cc233950aa8bc9bde135cadc4bbcfb0f12552d3d9ff0875fb SHA512: b69f9318686f0d6653bc177294a5ec7f85e2a6ac1e73513d79cf2d1a4ffa62dce65d6cade896b9ec763f8bb607167421cc569e0fc0c123f535f872e666fefb4c Description: get RAID status out of LSI Fusion MPT SAS2 HW RAID controllers The sas2ircu-status software is a query tool to access the running configuration and status of LSI Fusion MPT SAS2 HBAs. sas2ircu-status allows you to monitor the health and status of your RAID setup. Package: sas2ircu Architecture: amd64 Version: 16.00.00.00-2+Debian.buster.10 Priority: optional Section: admin Source: sas2ircu (16.00.00.00-2) Maintainer: Adam Cécile (Le_Vert) Installed-Size: 1460 Filename: pool-buster/sas2ircu/sas2ircu_16.00.00.00-2+Debian.buster.10_amd64.deb Size: 882822 MD5sum: 2c4dcea9a95cdb3bb50c200f57b2c4f8 SHA1: a5c6ef161c4059fe854903b67b15d9095b1e8043 SHA256: a05247e0ecb49629fa3b39a7a1f8958bbdbacda9f642e8995088a6cc229c59aa SHA512: 4d1afcc5c4b3bd686c3e85b451515687d30ee119716280aae58e76e19041bf96e5ddbf87dbe8e0fdb10b79834fd18276db6c258947d3465394a3a1ed9adc2830 Description: LSI Logic Fusion MPT SAS2 command line management tool Tool to read and setup LSI Logic Fusion MTP SAS2 HW RAID HBAs (mpt2sas driver). Package: sas3flash Architecture: amd64 Version: 17.00.00.00-1+Debian.10.buster Priority: optional Section: admin Source: sas3flash (17.00.00.00-1) Maintainer: Adam Cécile Installed-Size: 1060 Filename: pool-buster/sas3flash/sas3flash_17.00.00.00-1+Debian.10.buster_amd64.deb Size: 437386 MD5sum: dfb28a8493631a7a6b26d88e5014f0d7 SHA1: 04650e58336ee478cd01e26e55dfa9e01a708a53 SHA256: 5082a131161ebaa1a36dcce2feee379ce532506e7f2a6f240c51c1b955ef7da7 SHA512: 7789ad3ad48ffce9fc55d2437a927321e7eacef77eb95152059a54d4cb5a22a700cdb594cbc90008c0896ef83e759b3e04b8c1f500ee5f82344b8f1a6f2fc5a9 Description: Broadcom/Avago/LSI Fusion MPT SAS3 command line flash tool Tool to dump/flash firmware for Broadcom/Avago/LSI Fusion MTP SAS3 HBAs (mpt3sas driver). Package: sas3ircu Architecture: amd64 Version: 17.00.00.00-1+Debian.10.buster Priority: optional Section: admin Source: sas3ircu (17.00.00.00-1) Maintainer: Adam Cécile Installed-Size: 1331 Filename: pool-buster/sas3ircu/sas3ircu_17.00.00.00-1+Debian.10.buster_amd64.deb Size: 773338 MD5sum: 0d0799cfaf2169d2392b5a4e387bccaf SHA1: 8b4d2cc5180d9fca4731c652fa5f65be2f781ac6 SHA256: fc1533eb9dae40d1b761502521b468980173719cf3662e79278fb276fc9e33ed SHA512: f5f5f2d9f86641933d72d9b6ffc3c88ce4cc6e90d89566766efa38c9adf456ca8a1b0041f282520c3e32edf091e001eaff593e45909c938147aa31be0945ecc0 Description: LSI Logic Fusion MPT SAS2 command line management tool Tool to read and setup LSI Logic Fusion MTP SAS2 HW RAID HBAs (mpt2sas driver). Package: tw-cli Architecture: amd64 Version: 2:2.00.11.020+10.2.1-2+Debian.buster.10 Priority: optional Section: admin Source: tw-cli (2:2.00.11.020+10.2.1-2) Maintainer: Adam Cécile (Le_Vert) Installed-Size: 3446 Filename: pool-buster/tw-cli/tw-cli_2.00.11.020+10.2.1-2+Debian.buster.10_amd64.deb Size: 1256154 MD5sum: e240f10aa9cb91da28e2e456f7310bed SHA1: 664e5406eed692e3b687b189fc34d9f3f00afac8 SHA256: 557ca752664806206ba6a480f8ed1775a45eee9f70dc1006ea1ed120ba1e473b SHA512: f229695a2d95ab74a9deddd649b52d9664ad560fd9c14d0913d0a1f9e6de1c60c8f04cf78e1984a7c09d6c1fb5cd499164471d7cda349ff924de668c84e556a8 Homepage: http://www.lsi.com/channel/support/products/Pages/3wareSAS9750-8e.aspx Description: 3Ware management tool (tw-cli) This package contains tw-cli, the management tool for 3Ware Eskalad RAID cards. . It should works fine for 9000, 8000 as well as 7000 series.