This section describes how to use Adaptec Storage Manager to maintain the enclosures (JBODs) in your storage space.
Ensure that the speakers on your local system are not muted.
In the Enterprise View, select the controller that's connected to the enclosure you want to test.
In the Physical Devices View, right-click the Enclosure Management Device icon for the enclosure you want.
Select Alarm actions, then click Test alarm.
The alarm sounds.
To stop the test, click OK.
To Silence an Enclosure Alarm:
At this time, the Silence button on the Adaptec Storage Manager tool bar will not silence an alarm on JBODs. If an alarm sounds, you must silence it at the device level (for instance, by pressing the Mute button on the back of the JBOD), or use the CLI to enter a silence command.
To Disable an Enclosure Alarm:
You can disable the alarm for a selected enclosure, if required. If you disable the alarm, no audible signal will sound when an error occurs on the enclosure.
To disable an enclosure alarm:
In the Enterprise View, select the controller that’s connected to the enclosure you want.
In the Physical Devices View, right-click the Enclosure Management Device icon for the enclosure you want.
Select Agent Actions, then click Disable.
The alarm is disabled for that system.